Nano-ceramic Coating

Product Features (Functions)：

1. Quickly form a thin transparent crystal layer on the surface of the car paint, seal the car paint, and isolate the car paint from the outside air.

2. Form a physical protective film on the surface of the car paint to protect the car paint from corrosion by external environmental factors, so that the car paint can have long-term wear resistance, corrosion resistance, high temperature resistance, and oxidation resistance.

3. The gloss of the car paint will increase by 30%-40% after use, and it has strong water repellency and anti-fouling properties, so that the car paint can remain bright and new within a year.

Instructions for Use (Product User Manual)

1.Clean the vehicle paint (remove iron powder, tar, asphalt and other dirt)

2.After cleaning, polish and restore the paint (use water-based abrasives for polishing and restoration. If oil-based covering abrasives are used, the covering components in the abrasives will be wiped off during the degreasing process, resulting in a large number of fine scratches.)

3.After polishing and restoration, degrease, rinse the car and blow dry the seam water, apply directly to the paint surface, and wipe it clean with a clean and soft towel while applying.

4.When crystal plating, two people must work at the same time, one person applies the original liquid, and the other wipes the crystal plating liquid after a suitable time. Use a clean and soft towel to wipe evenly, and check for omissions when wiping.

5.After 1 hour after construction, when the crystal layer is sufficiently dry, you can use the curing agent, and then check for omissions, and remind the owner not to touch the paint with water within 3 days, and the remaining two bottles of care liquid should be used every three months to care for the paint.